- M-SERIES
- Effect Pedals
- Hand-Built Effect Pedals
- Multi-Effects
- Pedal Power Supply
- Music Light
- Pedal Tuner
- Accessories
- Bass Effect Pedal
LATEST NEWS
- 2017 MUSIC SHOW CHINA
- 2017-9-18 NEW PRODUCTS
- 2017-4-27 NEW PRODUCTS
- 2017-2-28 NEW PRODUCTS
- 2017-2-10 NEW PRODUCTS
- 2016-6-18 new products- Nano power sta
CONTACT US
- ADD:
- TEL: 086-18682010696
- FAX: 18682010696
- E-mail: info@moskyaudio.com
> Bass Effect Pedal
FIREWORKS
- Product description: BASS DIRVE+DI BASS EFFECT PEDAL
PRODUCT INTRODUCTION
FIRE WORKS
BASS DRIVE+DI
Tube Amplifier Emulation Sound
BASS Amp Modeler /Direct Recording Preamp/ DI Box
Much more than just a direct box, the Bass Driver DI is capable of dialing up big vintage tube tones, bright modern slap sounds, gnarly distortions, and all in between.
This design is intended to sound similar to the venerated Ampeg B15 tube combo.
Controls include VOICE for definition and upper harmonic content; MIX to combine the proportion of direct signal and The circuitry; and active EQ specifically tuned for bass with 12dB of cut or boost.
The controls offer a broad range of traditional bass amp sounds, including such meaty styles as Bassman and SVT, as well as raunchy, crunchy overdriven sounds that would typically require a multitude of effects units.
A DI (Direct Injection) box allows you to send a signal directly from unbalanced,high-impedance output (like a bass guitar) and connect it directly to the balanced mic input of a mixing console.
Whether for stage ,recording ,rehearsal or warm-up ,our pedal is anatural choice for those who
are seeking great tone with a simple set-up.
The DRIVE control adjusts the overall amount of gain and overdrive,similar to pushing the output section of a tube amp.
The HIGH control governs the high-frequency range of the signal (12dB)
The LOW control allows you to boost/cut the low-frequency range (12dB)
The VOICE control boosts the upper harmonic content for a smoother high end and more attack.
The LEVEL controls adjusts the output and XLR level of the pedal.
The MIX control adjusts the amount of tube emulation, The tube emulation circuitry provides the real tube sound of a miked bass tube amp.
IN : INPUT connector to plug in the instrument cable of your bass guitar or other instruments.
XLR OUT: the balanced mic level output. use a high-quality,balanced XLR (microphone) cable to connect the driver to mixing console.
OUT: OUTPUT connector sends the signal to your bass amp.
The LED illuminates when the effect is activated.
For studio and live applications, The Bass Driver DI is engineered with two outputs: an effected XLR, and effected 1/4″, . The footswitch activates the Tube Amplifier Emulation circuitry. Disengaging the circuitry enables you to use the Bass Driver as a standard active transparent direct box.
TECHNICAL SPECIFICATIONS:
BASS Amp Modeler /Direct Recording Preamp/ DI Box
True Bypass
Type: Analog Tube Amplifier Emulation
Power Requirements: DC9V , 60mA max -center negative (not included)
Dimensions 11.5*6.5*5.5CM
Weight :308g
PACKING
1* FIREWORKS
BASS DRIVE+DI
Tube Amplifier Emulation Sound
BASS Amp Modeler /Direct Recording Preamp/ DI Box
Much more than just a direct box, the Bass Driver DI is capable of dialing up big vintage tube tones, bright modern slap sounds, gnarly distortions, and all in between.
This design is intended to sound similar to the venerated Ampeg B15 tube combo.
Controls include VOICE for definition and upper harmonic content; MIX to combine the proportion of direct signal and The circuitry; and active EQ specifically tuned for bass with 12dB of cut or boost.
The controls offer a broad range of traditional bass amp sounds, including such meaty styles as Bassman and SVT, as well as raunchy, crunchy overdriven sounds that would typically require a multitude of effects units.
A DI (Direct Injection) box allows you to send a signal directly from unbalanced,high-impedance output (like a bass guitar) and connect it directly to the balanced mic input of a mixing console.
Whether for stage ,recording ,rehearsal or warm-up ,our pedal is anatural choice for those who
are seeking great tone with a simple set-up.
The DRIVE control adjusts the overall amount of gain and overdrive,similar to pushing the output section of a tube amp.
The HIGH control governs the high-frequency range of the signal (12dB)
The LOW control allows you to boost/cut the low-frequency range (12dB)
The VOICE control boosts the upper harmonic content for a smoother high end and more attack.
The LEVEL controls adjusts the output and XLR level of the pedal.
The MIX control adjusts the amount of tube emulation, The tube emulation circuitry provides the real tube sound of a miked bass tube amp.
IN : INPUT connector to plug in the instrument cable of your bass guitar or other instruments.
XLR OUT: the balanced mic level output. use a high-quality,balanced XLR (microphone) cable to connect the driver to mixing console.
OUT: OUTPUT connector sends the signal to your bass amp.
The LED illuminates when the effect is activated.
For studio and live applications, The Bass Driver DI is engineered with two outputs: an effected XLR, and effected 1/4″, . The footswitch activates the Tube Amplifier Emulation circuitry. Disengaging the circuitry enables you to use the Bass Driver as a standard active transparent direct box.
TECHNICAL SPECIFICATIONS:
BASS Amp Modeler /Direct Recording Preamp/ DI Box
True Bypass
Type: Analog Tube Amplifier Emulation
Power Requirements: DC9V , 60mA max -center negative (not included)
Dimensions 11.5*6.5*5.5CM
Weight :308g
PACKING
1* FIREWORKS
PREVIOUS：Double Voltage Cable
NEXT：SUPER OPTO
RELATED PRODUCTS
-
GAMMA
Bass Preamp...
-
Beta Ultra
Bass preamplifier+EQ+Distortion+DI...
-
THIRD SPACE
THIRD SPACE MULTI BASS AMP SIMPLIFIER BASS STATION ...
mosky